Nous utilisons des cookies sur notre site web.
Certains d'entre eux sont nécessaires au fonctionnement du site, mais vous pouvez décider des autres.
Vente, réparation et entretien de machinerie lourde. Voir notre inventaire
Horizontal Position
| Lower Length (A) | 46 in (116.8 cm) |
| Overall Length (A) + (C) | 94 in (238.8 cm) |
| Cart Length (C) | 48 in (121.9 cm) |
| Wheel Base (D) | 42 in (106.7 cm) |
| Width | 32 in (81.3 cm) |
| Height (E) | 32 in (81.3 cm) |
| Weight | 385 lbs (174.8 kg) |
| Drill Distance From Corner | 6 in (15.2 cm) |
| Drill Distance From Ground | 3 in (7.6 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Drill Distance From Wheel to Center of Bit (F) | N/A |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3 /min) |
| Operating Pressure | 90 psi (6.2 bar) |
Vertical Position
| Lower Length (A) | N/A |
| Lower Length (A) + (C) | 73 in (185.4 cm) |
| Cart Length (C) | 54 in (137.2 cm) |
| Wheel Base (D) | 48 in (121.9 cm) |
| Width | 54 in (137.2 cm) |
| Height (E) | Varies |
| Weight | 1,150 lbs (522.1 kg) |
| Drill Distance From Corner | N/A |
| Drill Distance From Ground | Up to 12 in (30.5 cm) |
| Drill Depth (std.) | 18 in (45.7 cm) |
| Drill Bit Diameter | 5/8 in to 2 1/2 in (15.9 mm to 63.5 mm) |
| Distance From Wheel to Center of Bit (F) | 21 1/2 in (54.6 cm) |
| Drill Motor (pneumatic) | CP 32A |
| Drill Motor Weight | 54 lbs (24.5 kg) |
| Chuck Size (std.) | 7/8 in x 3 1/4 in (22.2 mm x 82.6 mm) |
| Air Consumption (minimum) | 100 cfm (2.8 m 3/min) |
| Operating Pressure | 90 psi (6.2 bar) |
| Impact (ft. lbs./blow) | 36 fpb (49 J) |